1354/F65B3 ion exchange unit

Ion-exchange unit for water treatment: water passes through a housing filled with ion-exchange resin, and the ions dissolved in it are replaced by an equivalent amount of ions released by the media. Resin selection sets the specific task — softening, alkalinity reduction (decarbonization), partial or full desalination, nitrate or boron removal. When the media's exchange capacity is exhausted, the controls run a regeneration cycle and the unit returns to service.

Designs on 8 to 13-inch housings cover small and medium flow rates: these use Runxin valves with 3/4 and 1-inch connections and capacity up to 4.5 m³/h, all top-mounted. Some valves in the line are fitted with a water meter and track the interval between regenerations by actual flow, while the rest track it by time. Choosing within the line comes down to the site's flow rate, the media volume, and the regeneration trigger method.

Design 1354/F65B3: housing 13×54″, automatic Runxin F65B3 valve with water meter, up to 2.0 m³/h, 3/4" connection, top mounting. The valve is designed for softening — regeneration of the ion-exchange load with reagent solution. Weight 19.714 kg.

Configuration within the line: vessel size 1354 (13×54″) with control valve Runxin F65B3. On the same vessel size 1354 (13×54″) the line also offers Runxin F69P3, Runxin F63P3, Runxin F63C3, Runxin F82B3 and others. The same control valve Runxin F65B3 is fitted on 0844, 1054 and 1252. Among the units on vessel size 1354 (13×54″) this is the only one with purpose — softening.

On vessel size 1354 the closest alternatives to Runxin F65B3 are Runxin F69P3 (weight 19.374 kg instead of 19.714 kg), Runxin F63P3 (valve capacity up to 4.5 m³/h instead of up to 2.0 m³/h, connection 1" instead of 3/4", weight 19.816 kg instead of 19.714 kg) and Runxin F63C3 (valve capacity up to 4.5 m³/h instead of up to 2.0 m³/h, connection 1" instead of 3/4", weight 19.874 kg instead of 19.714 kg).