HG30/100L/dn20 dosing station

The dosing station feeds liquid reagents and solutions into the flow: it is used to adjust pH, reduce water corrosivity, inhibit salt precipitation, and perform chemical cleaning of membrane elements. The dosing pump, solution tank, and piping are combined into a single unit, so one installation replaces several separate devices on site.

Power supply — 220 V AC, 50/60 Hz. The station should be installed in a dry room away from heat sources. Versions differ in tank volume, dosing pump model, and connection size: the digital pump allows the dose and feed mode to be set from the panel, while the analog pump is adjusted with a regulator.

HG30 version with a 100 l tank and Mytho digital dosing pump, dn20 connection. Weight 21.65 kg.

Configuration within the line: tank volume 100 l, dosing pump Mytho digital, connection dn20. On the same tank volume 100 l the line also offers HG30/100L/dn32, HG30/100L/dn25, HP30/100L/dn25 and HP30/100L/dn32. The same dosing pump Mytho digital is fitted on HG30/100L/dn32, HG30/200L/dn50, HG30/100L/dn25, HG30/200L/dn40 and others. Among the units on tank volume 100 l this is the only one with connection — dn20.

On tank volume 100 l the closest alternatives to Mytho digital are HG30/100L/dn32 (connection dn32 instead of dn20, weight 23.6 kg instead of 21.65 kg), HG30/100L/dn25 (connection dn25 instead of dn20, weight 23.3 kg instead of 21.65 kg) and HP30/100L/dn25 (connection dn25 instead of dn20, series HP30 instead of HG30, weight 23.3 kg instead of 21.65 kg).