HG30/200L/dn32 dosing station

The dosing station feeds liquid reagents and solutions into the flow: it is used to adjust pH, reduce water corrosivity, inhibit salt precipitation, and perform chemical cleaning of membrane elements. The dosing pump, solution tank, and piping are combined into a single unit, so one installation replaces several separate devices on site.

Power supply — 220 V AC, 50/60 Hz. The station should be installed in a dry room away from heat sources. Versions differ in tank volume, dosing pump model, and connection size: the digital pump allows the dose and feed mode to be set from the panel, while the analog pump is adjusted with a regulator.

HG30 version with a 200 l tank and Mytho digital dosing pump, dn32 connection. Weight 26.6 kg.

Configuration within the line: tank volume 200 l, dosing pump Mytho digital, connection dn32. On the same tank volume 200 l the line also offers HG30/200L/dn50, HG30/200L/dn40, HP30/200L/dn50 and HP30/200L/dn40. The same dosing pump Mytho digital is fitted on HG30/100L/dn32, HG30/200L/dn50, HG30/100L/dn25, HG30/200L/dn40 and others. Among the units on tank volume 200 l this is the only one with connection — dn32.

On tank volume 200 l the closest alternatives to Mytho digital are HG30/200L/dn50 (connection dn50 instead of dn32, weight 31.7 kg instead of 26.6 kg), HG30/200L/dn40 (connection dn40 instead of dn32, weight 28.5 kg instead of 26.6 kg) and HP30/200L/dn50 (connection dn50 instead of dn32, series HP30 instead of HG30, weight 31.7 kg instead of 26.6 kg).