HP30/200L/dn40 dosing station

The dosing station feeds liquid reagents and solutions into the flow: it is used to adjust pH, reduce water corrosivity, inhibit salt precipitation, and perform chemical cleaning of membrane elements. The dosing pump, solution tank, and piping are combined into a single unit, so one installation replaces several separate devices on site.

Power supply — 220 V AC, 50/60 Hz. The station should be installed in a dry room away from heat sources. Versions differ in tank volume, dosing pump model, and connection size: the digital pump allows the dose and feed mode to be set from the panel, while the analog pump is adjusted with a regulator.

HP30 version with a 200 l tank and Mytho analog dosing pump, dn40 connection. Weight 28.5 kg.

Configuration within the line: tank volume 200 l, dosing pump Mytho analog, connection dn40. On the same tank volume 200 l the line also offers HG30/200L/dn50, HG30/200L/dn40, HG30/200L/dn32 and HP30/200L/dn50. The same dosing pump Mytho analog is fitted on HP30/100L/dn25, HP30/60L/dn25, HP30/60L/dn15, HP30/200L/dn50 and others.

On tank volume 200 l the closest alternatives to Mytho analog are HG30/200L/dn50 (connection dn50 instead of dn40, series HG30 instead of HP30, weight 31.7 kg instead of 28.5 kg), HG30/200L/dn40 (series HG30 instead of HP30) and HG30/200L/dn32 (connection dn32 instead of dn40, series HG30 instead of HP30, weight 26.6 kg instead of 28.5 kg).