HP30/60L/dn15 dosing station

The dosing station feeds liquid reagents and solutions into the flow: it is used to adjust pH, reduce water corrosivity, inhibit salt precipitation, and perform chemical cleaning of membrane elements. The dosing pump, solution tank, and piping are combined into a single unit, so one installation replaces several separate devices on site.

Power supply — 220 V AC, 50/60 Hz. The station should be installed in a dry room away from heat sources. Versions differ in tank volume, dosing pump model, and connection size: the digital pump allows the dose and feed mode to be set from the panel, while the analog pump is adjusted with a regulator.

HP30 version with a 60 l tank and Mytho analog dosing pump, dn15 connection. Weight 12.35 kg.

Configuration within the line: tank volume 60 l, dosing pump Mytho analog, connection dn15. On the same tank volume 60 l the line also offers HG30/60L/dn20, HP30/60L/dn25, HP30/60L/dn20 and HG30/60L/dn15. The same dosing pump Mytho analog is fitted on HP30/100L/dn25, HP30/60L/dn25, HP30/200L/dn50, HP30/200L/dn40 and others.

On tank volume 60 l the closest alternatives to Mytho analog are HG30/60L/dn20 (connection dn20 instead of dn15, series HG30 instead of HP30, weight 12.65 kg instead of 12.35 kg), HP30/60L/dn25 (connection dn25 instead of dn15, weight 14.3 kg instead of 12.35 kg) and HP30/60L/dn20 (connection dn20 instead of dn15, weight 12.65 kg instead of 12.35 kg).